Transformation efficiencies and progeny analysis after varying different parameters of direct gene transfer of Nicotiana tabacum protoplasts

Nicotiana tabacum protoplasts were transformed by polyethylene glycol (PEG)-mediated uptake and electroporation, with circular and linear DNA, and with or without X-ray irradiation. We investigated the influence on the transient expression by these parameters as well as on the frequencies for stable transformation. Plants were regenerated and selfed, and the progenies of the transformed plants were analysed and used to compare the pattern of gene integration by these different variations in transformation methods. The results from the transient expression as judged by glucuronidase (GUS) activity, showed electroporation to give higher and more reproducible results than PEG-mediated uptake. Using linear instead of circular DNA increased the rate of stable transformation about 3 times. Including a mild X-ray treatment gave an increase in the same range. When the inheritance of the transferred trait was investigated, it was found that protoplasts transformed with linear DNA resulted in the highest number of plants with single-copy insertions. Protoplasts transformed with circular DNA showed the highest incidence of losing the trait, while plants in which the transformation included an X-ray treatment, had the highest frequency of multicopy insertion events.     

Red-edge excitation fluorescence spectroscopy of proteins in reversed micelles

The dependence of fluorescence emission maxima ofl-tryptophan and single-tryptophan-containing proteins (ribonuclease T1, melittin, and parvalbumin) on excitation wavelength has been studied in reversed micelle systems of sodium bis(2-ethyl-1-oxyl) sulfosuccinate (AOT). No effect of fluorescence maximum shift for different excitation wavelengths is observed for ribonuclease T1, in which a single tryptophan residue is located in the nonrelaxating, nonpolar protein interior.l-Tryptophan and the rest of the studied proteins, which contain single tryptophan residues exposed to the solvent, exhibit the dipolar relaxational processes of partly immobilized water molecules in micelles. This effect depends on the molar H₂O/AOT ratio. Circular dichroism measurements prove that there have been no structural changes of the studied proteins in micellar systems. The results provide information about dynamic relaxational processes in proteins.     

The effect of N-terminal acetylation on the structure of an N-terminal tropomyosin peptide and alpha alpha-tropomyosin.

We have used a synthetic peptide consisting of the first 30 residues of striated muscle alpha-tropomyosin, with GlyCys added to the C-terminus, to investigate the effect of N-terminal acetylation on the conformation and stability of the N-terminal domain of the coiled-coil protein. In aqueous buffers at low ionic strength, the reduced, unacetylated 32mer had a very low alpha-helical content (approximately 20%) that was only slightly increased by disulfide crosslinking or N-terminal acetylation. Addition of salt (> 1 M) greatly increased the helical content of the peptide. The CD spectrum, the cooperativity of folding of the peptide, and sedimentation equilibrium ultracentrifugation studies showed that it formed a 2-chained coiled coil at high ionic strength. Disulfide crosslinking and N-terminal acetylation both greatly stabilized the coiled-coil alpha-helical conformation in high salt. Addition of ethanol or trifluoroethanol to solutions of the peptide also increased its alpha-helical content. However, the CD spectra and unfolding behavior of the peptide showed no evidence of coiled-coil formation. In the presence of the organic solvents, N-terminal acetylation had very little effect on the conformation or stability of the peptide. Our results indicate that N-terminal acetylation stabilizes coiled-coil formation in the peptide. The effect cannot be explained by interactions with the "helix-dipole" because the stabilization is observed at very high salt concentrations and is independent of pH. In contrast to the results with the peptide, N-terminal acetylation has only small effects on the overall stability of tropomyosin.     

Chiral copper(I)—thiolate clusters in metallothionein and glutathione

Metallothionein (MT) is a ubiquitous mammalian protein comprising 61 or 62 nonaromatic amino acids of which 20 are cysteine residues. The high sulfhydryl content imparts to this protein a unique and remarkable ability to bind multiple metal ions in structurally significant metal–thiolate clusters. MT can bind seven divalent metal ions per protein molecule in two domains with exclusive tetrahedral metal coordination. The domain stoichiometries for the M₇S₂₀ structure are M₄(S_cys)₁₁ (α domain) and M₃(S_cys)₉ (β domain). Up to 12 Cu(I) ions can displace the 7 Zn²⁺ ions bound per molecule in Zn₇–MT. The incoming Cu(I) ions adopt a trigonal planar geometry with domain stoichiometries for the Cu₁₂S₂₀ structure of Cu₆(S_cys)₁₁ and Cu₆(S_cys)₉ for the α and β domains, respectively. The circular dichroism (CD) spectra recorded as Cu⁺ is added to Zn₇–MT to form Cu₁₂–MT directly report structural changes that take place in the metal binding region. The spectrum arises under charge transfer transitions between the cysteine S and the Cu(I); because the Cu(I)–thiolate cluster units are located within the chiral binding site, intensities in the CD spectrum are directly related to changes in the binding site. The CD technique clearly indicates stoichiometries of several Cu(I)–MT species. Model Cu(I)–thiolate complexes, using the tripeptide glutathione as the sulfhydryl source, were examined by CD spectroscopy to obtain transition energies and the Cu(I)–thiolate coordination geometries which correspond to these bands. Possible structures for the Cu(I)–thiolate clusters in the α and β domains of Cu₁₂–MT are proposed. © 1994 Wiley-Liss, Inc.     

Conformation and activity ofPhaseolus coccineus var. rubronanus lectin

The conformation of native and denaturedPhaseolus coccineus var. rubronanus lectin was studied by circular dichroism (CD) and correlated to the hemagglutinating activity. The far-UV CD spectrum at 25°C showed a broad, negative band around 223 nm and a positive one at 196 nm. CD data analysis of the lectin indicated a -sheet-rich protein. At high temperatures, the spectrum was blue-shifted with increasing magnitude; these changes correlated well with the loss of the activity. The conformation of lectin betweenpH 2 and 10 remained essentially unchanged. AtpH 13 the CD spectrum resembled that of unordered form with a negative band near 200 nm and the activity was completely lost. The denatured lectin in 6 M guanidine hydrochloride would be renatured upon diluting the denaturant to 0.75 M; the changes in CD spectrum again correlated well with the loss of the activity. The effect of sodium dodecyl sulfate on the lectin was drastic; it sharply increased thea-helix at the expense of the -sheet and reduced the activity; the changes reached a plateau above 20 mM surfactant.     

A matter of timing: System requirements for repair and their temporal dimensions

Research into repair within the circular economy (CE) typically focuses on technical aspects of design, policy, and markets, and often assumes simplified conditions for the user/owner and the product system to explain the barriers to scaling repair activities. However, factors occurring at pre-use stages of the product's life cycle can significantly influence whether, and to what extent, repair is viable or possible, that is, warranty duration, after-sale service provision, and access to necessities. The passing of time can directly and indirectly affect the ability, difficulty, and thus, the likelihood of repair activities being performed at each stage of the product's life cycle. Drawing from the literature and applying inductive systems-thinking tools, we propose a framework for considering the “System of Repairability.” We delineate how the passing of time (temporal dimensions) affects one's ‘‘ability to repair,’’ as a product progresses through different life cycle phases (i.e., breakdown vs. repair vs. disposal), and the point(s) at which the repair is considered or attempted (i.e., year of usage). By integrating life cycle and temporal (time-based) dimensions into a broad System of Repairability framework, we clarify relevant interconnections, iterations, sequences, and timing of decision points, stakeholders, and necessary conditions to facilitate an outcome of successful repair at the individual level, and thus intervention strategies for scaling repair within CE. We discuss how a policy mix can address the life cycle of products and the repair system more holistically. We conclude with a future outlook on how temporal dimensions can inform policy strategies and future research.     

Combining industrial ecology tools to assess potential greenhouse gas reductions of a circular economy: Method development and application to Switzerland

Industrial ecology (IE) methodologies, such as input/output or material flow analysis and life cycle assessment (LCA), are often used for the environmental evaluation of circular economy strategies. Up to now, an approach that utilizes these methods in a systematic, integrated framework for a holistic assessment of a geographic region's sustainable circular economy potential has been lacking. The approach developed in this study (IE4CE approach) combines IE methodologies to determine the environmental impact mitigation potential of circular economy strategies for a defined geographic region. The approach foresees five steps. First, input/output analysis helps identify sectors with high environmental impacts. Second, a refined analysis is conducted using material flow and LCA. In step 3, circular strategies are used for scenario design and evaluated in step 4. In step 5, the assessment results are compiled and compared across sectors. The approach was applied to a case study of Switzerland, analyzing 8 sectors and more than 30 scenarios in depth. Carbon capture and storage (CCS) from waste incineration, biogas and cement production, food waste prevention in households, hospitality and production, and the increased recycling of plastics had the highest mitigation potential. Most of the scenarios do not influence each other. One exception is the CCS scenarios: waste avoidance scenarios decrease the reduction potential of CCS. A combination of scenarios from different sectors, including their impact on the CCS scenario potential, led to an environmental impact mitigation potential of 11.9 Mt CO₂-eq for 2050, which equals 14% of Switzerland's current consumption-based impacts.     

Until death do us part? In-depth insights into Dutch consumers’ considerations about product lifetimes and lifetime extension

Long-lasting electronic products contribute to a sustainable society; however, both expected and actual lifetimes are in decline. This research provides in-depth insights into consumers’ considerations about product lifetimes, barriers to extending lifetimes, and responses to a product lifetime label. Results of interviews (n = 22) with Dutch consumers suggest a positive view on long-lasting products. Nevertheless, their products’ value depreciated during their lifetimes. Consumers consider themselves unable to estimate how long products should last, which can be detrimental as low expectations tend to negatively influence actual lifetimes. Also, use intensity and consumers’ care(less) behavior influence the lifetime. To extend product lifetimes, consumers often disregard the option of repairing malfunctioning products. They have limited knowledge and ability, and believe repair provides poor value for money. Lifetime extension can also be hindered by market-related factors, such as convenient replacement services, new technological developments, and (attractive) deals. We suggest a product lifetime label should contain relevant and reliable information; furthermore, we recommend including (extended) warranty information. When information about repairability is included, potential negative responses should be considered. Finally, raising awareness about the environmental impact of short-lived products via a label may have a positive effect but requires more research attention.     

Developing Regenerate: A circular economy engagement tool for the assessment of new and existing buildings

The transition toward a circular economy (CE) is key in decarbonizing the built environment. Despite this, knowledge of—and engagement with—CE philosophies remains limited within the construction industry. Discussion with practitioners reveals this to be contributed to by a lack of clarity regarding CE principles, with numerous organizations recommending implementation of differing and sometimes conflicting principles. In addition, a systematic assessment of how building designs consider CE is made difficult by the multiple design areas required to be considered and the large amount of design data required to do so. The absence of a systematic CE assessment causes a lack of comparability across designs, preventing benchmarking of CE practices in building design at present. This paper details the development of Regenerate, a CE engagement tool for the assessment of new and existing buildings, established in an effort to overcome the aforementioned barriers to the adoption of CE within the construction sector. A CE design workflow for the built environment is proposed, comprising four overarching circularity principles (Design for Adaptability; Design for Deconstructability; Circular Material Selection; Resource Efficiency) and contributing design actions. In addition to engaging stakeholders by enabling the assessment of building designs, the tool retrieves key data for further research. Information on completed design actions as well as recycling and waste metrics is collected to facilitate future CE benchmarking. “Bill of materials” data (i.e., material quantities) is also compiled, with this being key in material stock modeling research and embodied carbon benchmarking.     

Analysis of parameters about useful life extension in 70 tools and methods related to eco-design and circular economy

One of the approaches followed by the circular economy (CE) to achieve sustainability through design is product life extension. Extending the life of products to make them useful for as long as possible is a means to reduce waste production and materials consumption, as well as the related impacts. For designers, conceptualizing products in a way that allows them to be used for longer is a challenge, and assessing how well they extend their lifespan can be helpful when it comes to choosing the best proposal. In this paper, 70 tools and methods related to eco-design and circular economy are studied to determine how many of them consider parameters related to life extension and which can be applied in the early stages of design. The results of the analysis show that most of the existing tools and methods are applicable to developed products, and only a few of them take into account parameters related to extending the useful life. Of the 70 tools and methods, only 14 include some parameter related to life extension and are applicable to concepts. CE toolkit, Eco-design PILOT, CE Designer, Circularity Assessment tool, Circularity Potential Indicator and Circular Design Tools take into consideration eight or more parameters to assess life extension in concepts. This will help designers select the most appropriate and will indicate the need for more complete tools to consider useful life extension in the early stages of design and thus enhance the selection of more sustainable products.